HL-Tiger smoke discharger

Fixes and mods for the HL Tiger 1
Post Reply
User avatar
birger
Lance Corporal
Posts: 138
Joined: Fri Aug 16, 2013 12:08 pm

HL-Tiger smoke discharger

Post by birger »

Hi guys,

today you are going to modify the smoke dischargers.

On the first picture you see the ones from the HL.

Mmh, there is something missing.

Image

If you take a look at the original ones, you can see a wiring.

Image

Let’s try to simulate it with simple things.

Dismount the dischargers from the turret.

Normally they are just stuck to the turret.

If you got a new Tiger, they should be inside the accessory box.

Image

Then take a small stranded wire.

As thinner as better.

Image

Skin half of the wires.

Image

Divide the strings in three bundles and twist them.

Image

Then glue the wire to the dischargers as shown.

Image

Now drill a hole to each discharger.

The size of the hole depends on the size of the strings.

Image

Cut the strings and put them into the holes as shown.

Image

The other end is to be cut, too.

Drill a hole to the turret roof and glue the other end of the wire as shown.

Image

Image

If you did it right, it should look like this.

Image

Greetings
Birger

For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11459
Fahrzeuge einsatzbereit: Tiger I HL 313, Tiger I Tamiya S33, Star Wars Tiger, Bergetiger
In der Inst: HL-PIII Lackierung, Vollkettenschlepper, Tiefladeanhänger
In Planung: MLRS,Crusader, KöTi, Jagdtiger, PIII, PIV,
Post Reply

Return to “HL Tiger 1”