Hi guys,
how can we open the Tiger?
Step 1: Remove the Tiger tracks
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11460
Then lay the tank on its back. Seven screws have to be removed. Three of them are located on the bottom of the lower hull.
Two are located under the track guards on the right side.
Two are located under the track guards on the left side.
Put the Tiger back on its wheels. Remove both tube clamps:
Remove the tubes from the air intake. This can be hard. Sometimes they are fixed with glue.
Now you can remove the upper hull.
Assembling works the other way round.
Greetings
Birger
For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11459
How to open the HL-Tiger
How to open the HL-Tiger
Fahrzeuge einsatzbereit: Tiger I HL 313, Tiger I Tamiya S33, Star Wars Tiger, Bergetiger
In der Inst: HL-PIII Lackierung, Vollkettenschlepper, Tiefladeanhänger
In Planung: MLRS,Crusader, KöTi, Jagdtiger, PIII, PIV,
In der Inst: HL-PIII Lackierung, Vollkettenschlepper, Tiefladeanhänger
In Planung: MLRS,Crusader, KöTi, Jagdtiger, PIII, PIV,
- jarndice
- Colonel
- Posts: 8020
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: How to open the HL-Tiger
If you smear vaseline on the ends of the intake pipes they come off much easier next time. shaun
I think I am about to upset someone
-
- Lance Corporal
- Posts: 169
- Joined: Wed Sep 08, 2021 2:28 pm
- Location: Peterborough, England
Re: How to open the HL-Tiger
This is no longer valid. The screws are not there on the recent variants.