Turret too high

Fixes and mods for the HL Tiger 1
Post Reply
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Turret too high

Post by ronnie42 »

Here is another tip the Tiger 1 turret sits high. If you have chopped up the upper hull and the turret lower to fix the out of true rotation this helps.
Remove the protruding ring on top of the hull , replace with doughnut piece of 0.6mm styrene circle or near enough and its at the correct height.
A cutting compass makes life easy.
A cutting compass makes life easy.
Result looks like this just like the real one
Result looks like this just like the real one
Post Reply

Return to “HL Tiger 1”