Minialand 3DP 1/6 R35
- Xiaoshan_Sailor
- Sergeant
- Posts: 706
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Minialand 3DP 1/6 R35
Minialand has released some initial photos of his new Renault R35 light tank prototype work. Will be offered in 1/6 scale just like his recently released FT-17. No word yet on expected release date but expect mid-summer.
- Kaczor
- Warrant Officer 1st Class
- Posts: 1775
- Joined: Fri May 18, 2018 9:58 am
- Location: Ciechanow, Poland
- Contact:
Re: Minialand 3DP 1/6 R35
Great! In 1939, there were about 50 of them in Poland. Later, our brigade used the R-35 in France in 1940.
- Xiaoshan_Sailor
- Sergeant
- Posts: 706
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Re: Minialand 3DP 1/6 R35
Minialand's R35 prototype work is progressing well.
- Xiaoshan_Sailor
- Sergeant
- Posts: 706
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Re: Minialand 3DP 1/6 R35
This week's update as the hull being assembled & finish work begins.
Once the R35 base model is complete & uploaded to Cults, he'll begin work on a German variant, the 4.7 cm PaK(t) (Sfl.) auf Fgst.Pz.Kpfw.35 R 731. This will be offered as an option similar to how he did with the FT-17 octagon turret module with files specifically needed for the conversion.
https://tanks-encyclopedia.com/4-7-cm-p ... w-35-r-731
You can follow his progress on Facebook.
Once the R35 base model is complete & uploaded to Cults, he'll begin work on a German variant, the 4.7 cm PaK(t) (Sfl.) auf Fgst.Pz.Kpfw.35 R 731. This will be offered as an option similar to how he did with the FT-17 octagon turret module with files specifically needed for the conversion.
https://tanks-encyclopedia.com/4-7-cm-p ... w-35-r-731
You can follow his progress on Facebook.
- Xiaoshan_Sailor
- Sergeant
- Posts: 706
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Re: Minialand 3DP 1/6 R35
R35 progress with files to be released later next month.
- Attachments
-
- 285360184_2188059114689675_3189501656012298236_n.jpg (60.71 KiB) Viewed 1128 times
- HERMAN BIX
- Brigadier
- Posts: 10311
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: Minialand 3DP 1/6 R35
Ok NOOOOOW you have my attention !!
Assume these STL's can be reduced for 16th scale without too much hassle ?
Assume these STL's can be reduced for 16th scale without too much hassle ?
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
- Xiaoshan_Sailor
- Sergeant
- Posts: 706
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Re: Minialand 3DP 1/6 R35
It's beginning to look a bit more French.
- Xiaoshan_Sailor
- Sergeant
- Posts: 706
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Re: Minialand 3DP 1/6 R35
Am planning to do the same for 1/10 so presume anything is possible. Files will be available sometime next month.HERMAN BIX wrote:Ok NOOOOOW you have my attention !!
Assume these STL's can be reduced for 16th scale without too much hassle ?
What until you see whats to come down the road once he finishes this & the VW Combi he's put on hold while completing the R35. Will be a fun year ahead for anyone interested in scale RC military vehicles.
- Kaczor
- Warrant Officer 1st Class
- Posts: 1775
- Joined: Fri May 18, 2018 9:58 am
- Location: Ciechanow, Poland
- Contact:
Re: Minialand 3DP 1/6 R35
1/6 model is made with specific bolts and bearings in mind. I'm also planning to scale it to 1/16 so we will seeHERMAN BIX wrote:Ok NOOOOOW you have my attention !!
Assume these STL's can be reduced for 16th scale without too much hassle ?
- Xiaoshan_Sailor
- Sergeant
- Posts: 706
- Joined: Thu Apr 12, 2018 3:04 pm
- Location: Hangzhou, China
Re: Minialand 3DP 1/6 R35
Yes, always account for every component when scaling up or down.
BTW, I was just given a preview on one exciting feature for this model that had not been shown before. Had to pick my jaw off the floor after seeing his CAD. Stay tuned!
BTW, I was just given a preview on one exciting feature for this model that had not been shown before. Had to pick my jaw off the floor after seeing his CAD. Stay tuned!