I had been disappointed with the lack of exhaust smoke coming from both my HL and Taigen Sherman. Had a brilliant idea. Slide heat shrink over the exhaust, cut to size and run them through the baffle. However the baffle is solid no vent openings. Today the dremel will come out.
No wonder the exhaust smoke was invisible.
Sherman exhaust
- Ecam
- Warrant Officer 2nd Class
- Posts: 1310
- Joined: Sun Jul 13, 2014 6:30 pm
- Location: Lake of the Ozarks, USA
Re: Sherman exhaust
I ended up building an extended box that reach the stock tailpipes. Added a small plate just inside to disperse the smoke as it comes out the diffuser.
It's about halfway down the page.
viewtopic.php?f=22&t=18401
Later (page 2) I ended up making a template to make my own diffusers and ended up making several.
It's about halfway down the page.
viewtopic.php?f=22&t=18401
Later (page 2) I ended up making a template to make my own diffusers and ended up making several.
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric