Next project, my Panther-G
Next project, my Panther-G
For now I am done with my Panther-F.
Next will be my Ausf.G
On this one also some Schurzen will be added, and as I am making it a Panther Befehlswagen, a 2m antenna and a star antenna will be on it too.
This is my Panther G
free image hosting
I am still waiting for these decals to come in
free photo hosting
And both antenna's missing too.
But I do have a nice Commander
afbeeldignen
Next will be my Ausf.G
On this one also some Schurzen will be added, and as I am making it a Panther Befehlswagen, a 2m antenna and a star antenna will be on it too.
This is my Panther G
free image hosting
I am still waiting for these decals to come in
free photo hosting
And both antenna's missing too.
But I do have a nice Commander
afbeeldignen
- HERMAN BIX
- Brigadier
- Posts: 10300
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: Next project, my Panther-G
Nice commander for sure !! Where is he from ??
Will be following this one along
Will be following this one along
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: Next project, my Panther-G
In fact this is supposed to be Michael Wittman.
But I do not care much for that, just liked the way the figure is and he fits my Panther very well.
The figure is from Torro, €19.95 and bought it from Dom's site.
But I do not care much for that, just liked the way the figure is and he fits my Panther very well.
The figure is from Torro, €19.95 and bought it from Dom's site.
Re: Next project, my Panther-G
Two antennas and 1 fug8 star antenna are for my Ostfront Tiger 1 Befehlswagen.
The other parts are meant to become onto my Panther-G
The other parts are meant to become onto my Panther-G
Re: Next project, my Panther-G
Today I started with the Schürzen on the Ausf. G
upload image
Measured the length on the hull and made the Schürzen fit to that size with some overlapping
upload pic
upload image
Measured the length on the hull and made the Schürzen fit to that size with some overlapping
upload pic
Re: Next project, my Panther-G
Bent some plate holders which have to be adjusted once attached to the Panther, with the Schürzen on it too
afbeeldinen
afbeeldinen
Last edited by Rob59 on Sat Sep 08, 2018 4:01 pm, edited 1 time in total.
Re: Next project, my Panther-G
Like on my Ausf. F, I had to make some clearance between the Schürzen and the hull. The tracks have some play on the idler wheels, so when the tank makes a turn, they move a bit outwards and might interfere or even throw off the rear Schürzen.
So I taped pieces of electricity wire onto the back of the Schurzen. They were just the right thickness to give the extra room between tracks and Schurzen.
So I taped pieces of electricity wire onto the back of the Schurzen. They were just the right thickness to give the extra room between tracks and Schurzen.
Last edited by Rob59 on Sun Sep 23, 2018 8:10 am, edited 2 times in total.