Page 1 of 5
Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Wed Feb 14, 2024 6:56 pm
by zooma
I am going to fit a full set of ball bearings to my Tamiya Leopard 2A6 to try to take up some of the "slop" that I think may be the cause of some of the broken suspension arms that I have suffered recently.
What I would also like to do is to find a source of replacement metal suspension arms to replace the original plastic kit parts. I am told that they do exist, but I have not been able to find any yet.
If anyone can provide a link to anywhere that sells them I would be very pleased to buy a set, but if anyone has any experience of actually fitting and using metal arms on their Tamiya Leopard 2A6 I would like to know if they fit OK without any modifications, and most importantly - do they work OK?
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 8:00 am
by Guido Henn
Hello,
here you can get the best ones for the Tamiya Leopard 2A6 :
https://afv-model.com/442/Leopard-2-M ... -Neusilber
with regards,Guido
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 8:17 am
by jhamm
Hi,
KingKong RC offers some on ebay:
https://www.ebay.com/itm/143012835981?i ... SwksRfR3Aa
but I recommend the ones from AFV
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 8:43 am
by tankme
KingKong RC stuff is sketchy. Never know if it will fit or not from what I've seen from others posting about it.
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 12:34 pm
by zooma
Thank you Guido,
I have just tried to oder a set of these metal suspension arms and I have put them in my basket, but I cannot speak German so I seem to be stuck at this stage and can make no more progress to pay for them.
I have tried to send them a message to explain this, but again I am not sure if it has been sent (all instructions are in German) and I don't know if they will be able to read my English either!
I hope to be able to resolve this problem and pay for them as these metal arms look good and should hopefully be a big upgrade to the reliability of the tank
Bob.
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 1:02 pm
by Son of a gun-ner
Hi Bob.
On my phone I have auto translate.
Therefore I will post a few screenshots of the process.
You are able to pay via bank transfer or PayPal, but they charge an extra 2.95% for using PayPal.
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 1:13 pm
by zooma
Son of a gun-ner wrote: ↑Thu Feb 15, 2024 1:02 pm
Hi Bob.
On my phone I have auto translate.
Therefore I will post a few screenshots of the process.
You are able to pay via bank transfer or PayPal, but they charge an extra 2.95% for using PayPal.
Thank you !
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 1:18 pm
by Son of a gun-ner
Go to basket.
See this. Top choice is your country, UK is second to bottom on the drop down.
Bottom choice is either bank transfer or PayPal.
- Screenshot_20240215-131141.png (426.06 KiB) Viewed 409 times
First drop down for country choice.
- Screenshot_20240215-131151.png (248.11 KiB) Viewed 409 times
Second drop down for payment method choice.
- Screenshot_20240215-131200.png (310.15 KiB) Viewed 409 times
After you've clicked on your chosen payment method, click bottom right. Zur Kasse (to checkout)
- Screenshot_20240215-131253.png (431.52 KiB) Viewed 409 times
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 1:19 pm
by Son of a gun-ner
Let me know which payment method you chose
Re: Metal Suspension Arms for TAMIYA Leopard 2A6
Posted: Thu Feb 15, 2024 1:35 pm
by Son of a gun-ner
Then you will get/see this menu.
English translation below.
I clicked on order without an account.
- Screenshot_20240215-131346.png (391.23 KiB) Viewed 405 times
- Screenshot_20240215-131412.png (415.54 KiB) Viewed 405 times