Winter 23-24. And the wall came down
-
- Staff Sergeant
- Posts: 975
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Winter 23-24. And the wall came down
Four inner rams made for the dozer blade. One attached to the dozer for dry run trials.
Just noticed the damage from drilling out the first attachment. I will have to remove the attachment points to drill out the positions
With the blade closed
Blade open
Finally inside. This is the pivot that I am not sure about, or how to make it, given my megure skill set.
Looking at the photos I need to clean off the dust.
Just noticed the damage from drilling out the first attachment. I will have to remove the attachment points to drill out the positions
With the blade closed
Blade open
Finally inside. This is the pivot that I am not sure about, or how to make it, given my megure skill set.
Looking at the photos I need to clean off the dust.
-
- Staff Sergeant
- Posts: 975
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Winter 23-24. And the wall came down
Removed the the side skirts and thinned down the protection where over the side skirt where the exhaust is. Tomorrow is supposed to be manky, so will get the new skirts made. Need a quiet time at work, so I can work on the lower hull.
-
- Staff Sergeant
- Posts: 975
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Winter 23-24. And the wall came down
This ain’t going anywhere at the moment. Work keeps giving me actual work to do, instead of allowing me to lock my self in the workshop, with a pilar drill, and a can of etch primer.
-
- Staff Sergeant
- Posts: 975
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Winter 23-24. And the wall came down
Small progress on this. All wheels drilled and fitted with bearings. Some are a bit tight, and will need to be drilled a bit deeper.
Messing around with the dozer blade.
And finally. Side skirts made from an old inner tube.
I need some etch primer, so the lower hull can go into paint. If it ever stops raining.
Messing around with the dozer blade.
And finally. Side skirts made from an old inner tube.
I need some etch primer, so the lower hull can go into paint. If it ever stops raining.
- Ecam
- Warrant Officer 2nd Class
- Posts: 1440
- Joined: Sun Jul 13, 2014 6:30 pm
- Location: Lake of the Ozarks, USA
Re: Winter 23-24. And the wall came down
What did you use for the fender (inner tube) connectors and with what cement? Looking great, love the dozer blade.
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric
-
- Sergeant
- Posts: 634
- Joined: Sat Jan 14, 2023 8:50 pm
- Location: Ontario, Canada
Re: Winter 23-24. And the wall came down
- Ecam
- Warrant Officer 2nd Class
- Posts: 1440
- Joined: Sun Jul 13, 2014 6:30 pm
- Location: Lake of the Ozarks, USA
Re: Winter 23-24. And the wall came down
Me too!
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric
Re: Winter 23-24. And the wall came down
Mr. Rat I love how those side skirts are coming out. They really look the part. As Nightshift says; "they look so heavy".
You mentioned cleaning off the dust earlier. Ahhh that's nothing. I'm constantly battling my 4 felines getting in my stuff. One out of nowhere now likes to chew on the nifty Imex parts bags that Dave sent me. But I'm invariably mortified when looking at pics I've taken and see black furrs somewhere in the frame.
You mentioned cleaning off the dust earlier. Ahhh that's nothing. I'm constantly battling my 4 felines getting in my stuff. One out of nowhere now likes to chew on the nifty Imex parts bags that Dave sent me. But I'm invariably mortified when looking at pics I've taken and see black furrs somewhere in the frame.
"Charlie don't surf"- Lt. Col. Bill Kilgore
-
- Staff Sergeant
- Posts: 975
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Winter 23-24. And the wall came down
Turret is nearly ready for paint. Cable runs made from solder to the smoke discharges. I need to make a piece to go to the moveable spot light. This also need connecting to the gun so it moves with it. I then need to install the lenses. Going to try with an old CD, but haven’t had much joy with these. If this doesn’t work I will use some cleaned food packaging painted blue.
With a wee bit of luck, the whole model will be in etch primer by the end of the week. Then we are away for two weeks.