Taigen V3 IR smoking main gun.

[crisis7501]

Hi, I do not know very much on the electronic side for RC tanks.
I want to have the main gun puff out smoke on firing the main gun.
Would the HL smoke systems work and what would I need to connect to where on the V3 board?
Any help would be appreciated!?

[Jofaur86]

Hello, I don't use this? but isn't sure that works with a V3 card without major modifications? more planned for new TK cards, after other more qualified members, we will enlighten you more
Look in the post ēlectronique a "Smoker" maybe you will already find information?

[crisis7501]

Hello, I don't use this? but isn't sure that works with a V3 card without major modifications? more planned for new TK cards, after other more qualified members, we will enlighten you more
Look in the post ēlectronique a "Smoker" maybe you will already find information?

Thanks!

[Jofaur86]

by searching a little on the net, I found this,
https://www.rctank.de/Taigen-Servo-und- ... ul-Platine
Sorry the German language
more on this forum, there are many resellers, a member to whom you can ask your questions, link of his sales site
https://www.forgebeartanks.com/store/c1 ... ducts.html

[Herr Dr. Professor]

Here it is auf Englisch: https://www.rctank.de/Taigen-servo-and- ... cuit-board.
I didn't know this circuit board was available for Taigen tanks. Let me see, a few thousand dollars and I could convert all my Taigen BB tanks... No, dream on, fool!

[crisis7501]

Danke!

[crisis7501]

Here it is auf Englisch: https://www.rctank.de/Taigen-servo-and- ... cuit-board.
I didn't know this circuit board was available for Taigen tanks. Let me see, a few thousand dollars and I could convert all my Taigen BB tanks... No, dream on, fool!

Hi, do you know how this would be fitted? I got one but no instructions or diagram??

Thanks.

[Jofaur86]

Hello, unfortunately there is? never any diagram provided?? I searched on the internet? but found nothing? on the other hand it seems that it is necessary to add a socket on the upper chassis, and which I think will redo the connections by wires on the existing 8 pins. If from RC Tank.de? the best would be to send an email to Dominique, for information, attached the email "info@rctank.de"

[Jofaur86]

Good evening again, then found this on the Imex site, which confirms that the existing plug (8 pins) must be replaced by another type. Personally I would say that in the 5 pin plug the black and the red are the + and the - but the other 3? the two white plugs must be the smoker and the fan, but in what order? Did you check if there is anything indicated on the green side of the CI. Or welds?

IMG_2971.jpeg (235.33 KiB) Viewed 738 times

Link Imex photo
https://www.google.fr/search?client=saf ... z1Pw6PWu3M

[crisis7501]

I contacted RC Tanks in Germany. They passed over the following wiring picture. It seems easy!?