Hey all. Anyone know of a good alternative control board for my tank? It’s 24v
Don’t worry about transmitters. I fly Rc helis and planes so I have spare 2.4ghz transmitters.
Thanks
Alternative MFU board for 1/8 All Metal Tiger I?
- Muscleflex
- Lance Corporal
- Posts: 165
- Joined: Thu Sep 03, 2015 7:54 am
- Location: West Yorkshire, UK
Alternative MFU board for 1/8 All Metal Tiger I?
- Attachments
-
- IMG_8575.jpeg (2.7 MiB) Viewed 723 times
-
- IMG_8576.jpeg (2.59 MiB) Viewed 723 times
-
- IMG_8577.jpeg (1.44 MiB) Viewed 723 times
-
- IMG_8573.jpeg (2.56 MiB) Viewed 723 times
-
- IMG_8627.jpeg (2.27 MiB) Viewed 723 times
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Alternative MFU board for 1/8 All Metal Tiger I?
Hello, I confirm what friend Kaczor, writes at "Amortek" see attached link and post "option pack" otherwise Elmod, but works max 12 volts, and separate Escs under 24 Volts, but less simple? because the other engines? (recoil, elevation, turret rotation, etc.) must also be 24 volts?
https://www.armortek.co.uk/armortek-shop/
https://www.armortek.co.uk/armortek-shop/
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Alternative MFU board for 1/8 All Metal Tiger I?
Question ? it is not possible, to keep the original electronics, to have all the additional functions, and to install 2 Esc in relation to the intensity of the motors, directly on the RX? maybe stupid, what am I saying? ?but should work?
- tankme
- Warrant Officer 1st Class
- Posts: 1999
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: Alternative MFU board for 1/8 All Metal Tiger I?
I would say something similar is already in that "black box" where the power goes in. My educated guess would be that they have the ESCs wired into a standard HL electronics and a step down for it while bypassing the ESC functions of the controller. They are using their standard controller with this tank which tells me they are using some form of their embedded RX and not a standalone RX.
Derek
Too many project builds to list...
Too many project builds to list...