ive got a old m26 pershing that had a crcuit bord reciever ive taken theat out and im installing a 7.1 board in.
the on off switch has 2 red wires on it and 1 black wire do i need all the red wires or just the red and balck and do they just connect straight to the board .also does the battery connect straight to the board via the connecter from under the tank ? i have searched but found nothing.
switch wires
-
Jofaur86
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: switch wires
Good morning,the battery is connected directly to the 7.1 and the switch (2 wires) comes in CN 1 (power switch) if a black wire? think you are reusing the old switch, sorry, but for some reason...can't attach photos
-
mrmetallica
- Private
- Posts: 95
- Joined: Sat Mar 18, 2023 10:11 pm
- Location: london
Re: switch wires
ok thank you just dont want to blow anything
-
Jofaur86
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: switch wires
Hello, attached link, inter and platinum TK 7.1 connection diagram, good job https://www.rctank.de/Ein-Ausschalter-i ... ge-ca19-cm
http://www.rc-panzer-shop.de/rc-tank-information
-
mrmetallica
- Private
- Posts: 95
- Joined: Sat Mar 18, 2023 10:11 pm
- Location: london
Re: switch wires
thank youJofaur86 wrote: ↑Sun Apr 23, 2023 7:20 pm
https://www.rctank.de/Ein-Ausschalter-i ... ge-ca19-cm
http://www.rc-panzer-shop.de/rc-tank-information
