Okay, I tested mine again. Sorry, I made a mistake in how to change the settings. I forgot to mention an important detail. There's a difference between short and long pressing the K1/K2 buttons.MonsieurTox wrote: ↑Tue Nov 15, 2022 10:16 pmThank you, I havent seen any difference in range with K2 !ArchieNov wrote: ↑Tue Nov 15, 2022 7:31 pmK2 changes the range of motion for the barrel elevation. One setting has a greater range than the other. For example, in my Leo the default range only goes down to parallel at the lowest angle. But at the greater range setting, it can go even lower than that.MonsieurTox wrote: ↑Tue Nov 15, 2022 6:21 pm
Well actually I cant get it works, it changes the direction of the recoil but not the reload. I tried also K2, not sure what it is supposed to do but it seems to do nothing.
As for the K1 button, since it is used to change both the barrel recoil direction and reload direction, you have to press it multiple times to get it to cycle to the right combination. At least that is what I have observed when I used it myself. For example, pressing it will cycle it through the following combinations (not necessarily in the order I show below):
1st press - Recoil forward, Reload up
2nd press - Recoil backward, Reload up
3rd press - Recoil forward, Reload down
4th press - Recoil backward, Reload down
5th press and beyond should just cycle through the combinations again.
Regarding K1, it seems I only have 2 cycles, I'll try again tomorrow but I pressed K1 ten times or so and the reload was always up, only the recoil was changing.
Thanks again for your help !
K1 short press (you hear 1 beep only) - cycles between forward/backward cannon recoil
K1 long press (you hear 2 beeps) - cycles between reversing the upward/downward controls of the cannon lifting. It also has the side effect of making the cannon go parallel after firing when the controls are reversed (e.g. moving the control stick up moves the cannon down)
K2 short press (you hear 1 beep only) - decrease cannon lifting angle range of motion.
K2 long press (you hear 2 beeps) - increase cannon lifting angle range of motion.
There are at least 3 settings for K2, so you will need to increase or decrease consecutively to reach the highest or lowest range of motion. The lowest range barely lifts the cannon.
Here's a video of me demonstrating the K1 long press function: