how to install tk22 into a torro king tiger

[Tank Maniac]

Hi guys hope you can help. I am a raw nooby with rc tanks this is going to be a real basic question so please accept my apologies here we go.
my question is how to install a clark tk22 board into a torro king tiger and configure a flysky fs-i6 to run tank. hope you guys can help.

[dgsselkirk]

Print out all the instructions from The Clark website take a deep breath and be methodical in following the instructions. Is it BB or IR?

http://www.clark-model.com/eng/index_e.html

[silversurfer1947]

Follow what Dean has suggested. Regarding the FlySky i6, I would suggest you initially connect it up exactly as per the Clark instructions. I am assuming you are using the receiver that came with the transmitter, so it will already be bound. Either sit the tank so the tracks are off the ground or put it on the floor with space around. Turn on the transmitter then the tank. Try out the controls and see what does what. Then it is a matter of swapping the receiver channels around till the controls work as you want them to. A lot of people have throttle and steering on the right stick and turret functions on the left. I am left handed so prefer mine the other way around. One modification I would suggest is to make both sticks self center g.

[Simonslim]

Just bought a Torro Tiger 1 and I'm going to be switching boards soon. Is it possible to have the main gun firing from a switch with the tk22 rather than from pushing the stick forward.

[lmcq11]

Hi, for that, I suggest you get a TK-60 instead of a TK-22 if you have 8 channels or more on your receiver.

[Simonslim]

Hi, for that, I suggest you get a TK-60 instead of a TK-22 if you have 8 channels or more on your receiver.

Cheers, will do.