t34
- tanker 242
- Corporal
- Posts: 407
- Joined: Sun Dec 09, 2012 5:14 pm
Re: t34
hi forgebear was just looking at that on the web page & am going to order one tomorrow with the top deck.tanker 242
- tanker 242
- Corporal
- Posts: 407
- Joined: Sun Dec 09, 2012 5:14 pm
Re: t34
have just sent my order in this morning for the turret & upper hull ,for the taigen t34/85 from forgebear, I hope it will be easy to fit to the heng long lower hull & the wireing will be easy to connect up . tanker 242
- tanker 242
- Corporal
- Posts: 407
- Joined: Sun Dec 09, 2012 5:14 pm
Re: t34
hi dave have fitted the taigen infrared t34/85 turret & upper deck everything works eccept the recoil & flash , all wires connected to mfu correctly 5pin with 5 wires to cn2 , other 5pin with 3 wires to cn3, 3pin connected to small board next to 8pin on hull top , red wire & black wire for turret m/g connected to hull m/g, gun up/down works, turret l/r works light works, tanker 242.
- tanker 242
- Corporal
- Posts: 407
- Joined: Sun Dec 09, 2012 5:14 pm
Re: t34
ps, blue wire connected to battery negative switch in turret turned on,
Re: t34
Hi Tanker 242, does the elevation operate when you push the stick up to fire?
One of my Taigen Tigers will do that if the 3 pin plug is connected backwards, you get elevation both ways and no recoil, might be worth turning the plug round?
One of my Taigen Tigers will do that if the 3 pin plug is connected backwards, you get elevation both ways and no recoil, might be worth turning the plug round?
You can never have too many tanks......
- tanker 242
- Corporal
- Posts: 407
- Joined: Sun Dec 09, 2012 5:14 pm
Re: t34
hi KT , no it dose not every thing works normaly eccept the recoil & flash , dave from forgebear is talking to taigen about it as someone else has the same problem , tanker 242.
- forgebear
- Warrant Officer 1st Class
- Posts: 1811
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: t34
hi. got an answer on the wiring. here is a pic showing wires. you just need to move the one green wire one peg along as per the picture. this is for the heng long 2.4 for taigen the wiring does not change. let me know how you get on. dave