battry compartment lid.

This section contains tips and tricks on building and running model vehicles. If you know any then post them here and if you need to find any, try your first search here.
Forum rules
This section is for posting helpful Tips and Tricks only. Questions need to be posted within general questions section viewforum.php?f=14
Post Reply
afv
Lance Corporal
Posts: 227
Joined: Mon Oct 20, 2008 5:18 pm

battry compartment lid.

Post by afv »

If you still have the battery in the original compartment you might have noticed the bow in the lid, what i did was cut some 1.5mm plasticard to be a tight fit in the square sections inside the lid, used a few clamps to clamp it to a straight edge and clamped each piece as i glued them, normal polystyrene glue, and started from the centre four squares working outwards
regards  Jack.
Top
BREL
2nd Lieutenant
Posts: 2473
Joined: Tue Jul 22, 2008 9:10 pm

Re: battry compartment lid.

Post by BREL »

great tip, I would have done that if I had not bought the metal lower hull. any way I have sold the spare lower hull to andyd and it is enroute to him as I type this
Last edited by BREL on Wed Feb 04, 2009 8:59 pm, edited 1 time in total.
Top
Post Reply

Return to “Tips and Tricks”