Page 13 of 17
Re: T90 'Z' TWEETY-BIRD
Posted: Wed Nov 16, 2022 11:36 pm
by HERMAN BIX
order up !!
- 6 MG ammo tins
- 6 125mm crates
- 10 of each of the bottles.total 30
- 5 cooler botles
Happy to pay extra for tinting if you can.
Re: T90 'Z' TWEETY-BIRD
Posted: Thu Nov 17, 2022 12:02 am
by HERMAN BIX
While I wait for the finishing touches to roll out of the Raminator production facility, I amused myself with reducing the profile of the barrel.
Used beading wire along the barrel to attach some scraps of a netting material that I cannot recall even getting
Under that i painted some bandage with a green /khaki mix and sliced it into strips.
Jury is out on the strips, not secured yet,
- IMG_0322.JPG (164.66 KiB) Viewed 1897 times
but once touched up they will likely stay.
I see in touring around the tank part retailers in the Northern Hemisphere there has been a rush on T90 crew figures
- IMG_0323.JPG (187.99 KiB) Viewed 1897 times
- IMG_0328.JPG (211.74 KiB) Viewed 1897 times
- IMG_0329.JPG (202.44 KiB) Viewed 1897 times
Re: T90 'Z' TWEETY-BIRD
Posted: Thu Nov 17, 2022 12:50 pm
by Pavel
These are great figures!
Re: T90 'Z' TWEETY-BIRD
Posted: Fri Nov 18, 2022 7:47 pm
by Aussie
The barrel cam netting looks really good, well done.
Re: T90 'Z' TWEETY-BIRD
Posted: Mon Nov 21, 2022 9:23 am
by Raminator
HERMAN BIX wrote: ↑Thu Nov 17, 2022 12:02 am
While I wait for the finishing touches to roll out of the Raminator production facility,
I'm working on it! Everything should be ready to post by the end of the week. Got the bottles done so far:
- IMG20221121173858.jpg (345.45 KiB) Viewed 1851 times
The fun thing about clear resin is that it glows while you cure it. It's really pretty with the lights off!
- IMG20221121175338.jpg (341.28 KiB) Viewed 1851 times
HERMAN BIX wrote: ↑Thu Nov 17, 2022 12:02 am
Jury is out on the strips, not secured yet, but once touched up they will likely stay.
The netting looks great, but I think the bandage strips stick out a bit too much because the denser material makes them look darker than they actually are (particularly in silhouette). A bit of dusting over the top might blend them back together?
Re: T90 'Z' TWEETY-BIRD
Posted: Tue Nov 29, 2022 5:32 am
by HERMAN BIX
- 565B6724-099A-4BD9-AAA2-40868EF31057.jpeg (2.52 MiB) Viewed 1814 times
- 40AE2D9F-21CB-4356-8B35-C9659BDF4BF8.jpeg (2.57 MiB) Viewed 1814 times
Been experimenting with the rubbish bags seen on a lot of Russian AFV's that seem to be filled with dirt to act as additional protection. some are white, some blue, some green, I've made blue ones, but can do them in any colour required.
used small zip lock bags, folded in half and painted on the inside with tamiya XF-8 Flat Blue.
A teaspoon -ish of actual sand, and tied off with green cotton.
I checked the scale with rubbish bags I have at home & they are virtually identical for size.
Plausible that domestic dwellings have them handy, and the crews take any opportunity to give themselves any advantage they can get, even if its futile.
I have another 3 in progress.
Once filled & tied off, i fold the bag in half and secure the halves with neat PVA glue.
Then using neat PVA, place the bag in position.
Once the plastic bottles & other goodies arrive from Mr Raminator, this thing should look pretty close to how a lived in and reluctantly crewed tank looks in so many you-tube clips common on the net now.
Ive still to lightly wash them & dust them in with the rest of the tank.
Re: T90 'Z' TWEETY-BIRD
Posted: Tue Nov 29, 2022 8:41 am
by Aussie
They look good and break up the green colour well.
Re: T90 'Z' TWEETY-BIRD
Posted: Tue Nov 29, 2022 11:06 am
by Raminator
I agree, the contrast with the green tank and red-brown cage makes everything pop and it looks great. Looking forward to seeing all the stowage piled on!
Re: T90 'Z' TWEETY-BIRD
Posted: Tue Nov 29, 2022 6:05 pm
by Pavel
On a machine gun, these handles have this color ...
It will add brightness...
Re: T90 'Z' TWEETY-BIRD
Posted: Wed Nov 30, 2022 11:17 pm
by HERMAN BIX
- 5AB9397D-D9DD-4E73-BBFD-22E2CB1C3038.jpeg (2.34 MiB) Viewed 1770 times
- 5E5E6904-A445-46F0-A474-8747307A8F07.jpeg (2.31 MiB) Viewed 1770 times
I did try to get the handles into the close colour but they went too dark. I might give it a go over with a much lighter shade & see if that works.
The plastic bag armour upgrade is now on the other side.!
Looks ok, perhaps another one or two here & there
Once all the extra stowage goes on it will finish the look im after.