Info road wheels metal tiger1 torro

[General Jumbo01]

I suggest you take it to a RC model shop and pay them to fix it.

[john1970]

Came unglued by the look of it the silver part is the end of the axle shaft

[General Jumbo01]

Ah, yes. The magnet has come unglued so the never used late wheel has fallen off. I give up! ;(

So much missinformation, so little time...
Wibble

[Model Builder 4]

There is NO MAGNET, the round silver head is the axle shaft that fits through the inner half of the road wheel and into the suspension arm. The outer half of the wheel pushes over the shaft hole of the inner wheel half, a dab of glue can be used if it is to loose just to stop it falling off

Cheers, Lee.

[General Jumbo01]

Thanks Lee, sense at last. So.. where does the magnet go?

[desmo16]

uploads photos

This is the view of the whole. I invited an email to rctank.de

[Model Builder 4]

That's the first time somebody has said that I've talked sense

Cheers, Lee.

[General Jumbo01]

Just kidding

[desmo16]

There is NO MAGNET, the round silver head is the axle shaft that fits through the inner half of the road wheel and into the suspension arm. The outer half of the wheel pushes over the shaft hole of the inner wheel half, a dab of glue can be used if it is to loose just to stop it falling off

Cheers, Lee.

Thank you all! If so can it go well as Loctite 480 glue?

[john1970]

should do clean the mating surfaces first and dont get glue on the axle shaft