Abrams turret floor mod so you can fix bustle rack in place
-
- Lance Corporal
- Posts: 156
- Joined: Sat Dec 25, 2021 9:16 pm
Abrams turret floor mod so you can fix bustle rack in place
Dear All
I didn’t add this to the build as it’s general to all Abrams, just a way of fixing the bustle rack in place so you don’t have to remove it to get into the turret, and you can then fit the trumpeter one.
The trumpeter rack is the right size, it’s the heng long rear top edge of the turret that is a bit too short.
If I should have putt his in the other post, let me know and I’ll do that.
https://youtu.be/2sjXisdXmvs
I didn’t add this to the build as it’s general to all Abrams, just a way of fixing the bustle rack in place so you don’t have to remove it to get into the turret, and you can then fit the trumpeter one.
The trumpeter rack is the right size, it’s the heng long rear top edge of the turret that is a bit too short.
If I should have putt his in the other post, let me know and I’ll do that.
https://youtu.be/2sjXisdXmvs
- tankme
- Warrant Officer 1st Class
- Posts: 2004
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: Abrams turret floor mod so you can fix bustle rack in pl
It is definitely a helpful thing to do for maintenance reasons. I've done the same mode to my Trumpeter 1/16 T-72B1, my HL Abrams, and my Trumpeter M1A1 AIM Abrams.
Derek
Too many project builds to list...
Too many project builds to list...
Re: Abrams turret floor mod so you can fix bustle rack in pl
Yep, it is the only way to go.
Allows quick and easy access to turret mounted electronics.
Barry
Allows quick and easy access to turret mounted electronics.
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci
-
- Lance Corporal
- Posts: 156
- Joined: Sat Dec 25, 2021 9:16 pm
Re: Abrams turret floor mod so you can fix bustle rack in pl
Hi!
and sorry Barry and tankme , i hadn't realized you'd done the same thing, i looked at the first 2 pages of you build, and i decided i wouldn't do an m1a1! its top notch.
If its not a rude question, what did you do for a living before you retired?
and sorry Barry and tankme , i hadn't realized you'd done the same thing, i looked at the first 2 pages of you build, and i decided i wouldn't do an m1a1! its top notch.
If its not a rude question, what did you do for a living before you retired?
Re: Abrams turret floor mod so you can fix bustle rack in pl
No apology needed, not everyone sees all the different builds. It is always good to cast light on Good Ideas! I shamelessly stole the idea from someone else here myself.Mr tank a lot wrote:Hi!
and sorry Barry and tankme , i hadn't realized you'd done the same thing, i looked at the first 2 pages of you build, and i decided i wouldn't do an m1a1! its top notch.
If its not a rude question, what did you do for a living before you retired?
I spent 40+ years in Aviation Maintenance, specifically Aviation Electronics.
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci
Re: Abrams turret floor mod so you can fix bustle rack in pl
Good job
I did the same for my son's Abrams (old Hobby Engine). The bustle rack is attached to the top of the turret. I added a servo as an elevation drive (I have HL TK 6.1) and a sensor that detects when the barrel is above the engine deck...
I did the same for my son's Abrams (old Hobby Engine). The bustle rack is attached to the top of the turret. I added a servo as an elevation drive (I have HL TK 6.1) and a sensor that detects when the barrel is above the engine deck...
- tankme
- Warrant Officer 1st Class
- Posts: 2004
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: Abrams turret floor mod so you can fix bustle rack in pl
Yeah, definitely no reason to apologize as Barry said. I'm an old MI guy (military intelligence for you civilian folk) that turned into an IT guy after the Army (for the last 28 years). My adult love of tanks started with an RC 21st Century 1/6th scale Stuart I bought at Walmart for $50. From there I found the Fort Snelling Military Museum in St. Paul, MN and volunteered to work on actual tanks. That morphed into 1/6th scale RC paintball firing tanks and now into 1/16th scale tanks.
We all steal ideas from each other which is why we are all here. Well that and to show off our builds.
Derek
We all steal ideas from each other which is why we are all here. Well that and to show off our builds.
Derek
Derek
Too many project builds to list...
Too many project builds to list...
- jarndice
- Colonel
- Posts: 8030
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Abrams turret floor mod so you can fix bustle rack in pl
I have a Heng Long Abrams still boxed along with a Challenger and some other Armour which I will if I live to be about 150 I will get sorted out In the meantime I am building up a parts bin for each Tank so I can just get on with it when I have the time,
Is there a site where I can purchase a "Trumpeter Rack"?
Is there a site where I can purchase a "Trumpeter Rack"?
I think I am about to upset someone
Re: Abrams turret floor mod so you can fix bustle rack in pl
From time to time a US seller pops up on ebay.com offering multiple sprues from Trumpeter Abrams. Now I haven't found it, but it's worth checking it every now and then.
- jarndice
- Colonel
- Posts: 8030
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Abrams turret floor mod so you can fix bustle rack in pl
Thank you for that,abramsky wrote:From time to time a US seller pops up on ebay.com offering multiple sprues from Trumpeter Abrams. Now I haven't found it, but it's worth checking it every now and then.
I shall start scanning E-Bay.
I think I am about to upset someone