A tad too much rust for my taste but I'm weird.
As to the grass problem what gearboxes are you running? My King Tiger just broke the 22lb/10kg mark and has no problems in grass. I'm running 4.1 hardened steel gearboxes with black hi-torque motors, IBU2 board, and 2 7.2 volt batteries. This thing goes ANY PLACE I want it to! I just need to re-set the motors amp setting to 15amps up from 10amps and then forget it this thing will be unstoppable!
I like the way you've done the inside, very nicely done! Did you make a metal plate for the underneath? It looks like you did.
Help please....I'm i doing this King tiger Right ?
-
- Warrant Officer 2nd Class
- Posts: 1317
- Joined: Tue Jan 06, 2015 9:59 pm
- Location: Peterborough Cambridgeshire UK
Re: Help please....I'm i doing this King tiger Right ?
2 battery's? Where did you find the room jack!!
Taigen Tiger 1 full option rctank.de special edition airbrush paint IR equipped
Type 90 1/24
WSN T34
Heng long leopard 2a6
Heng long panzer 4 platinum
Heng long sherman
Grantham Light Armoured Division RCTC
Type 90 1/24
WSN T34
Heng long leopard 2a6
Heng long panzer 4 platinum
Heng long sherman
Grantham Light Armoured Division RCTC
Re: Help please....I'm i doing this King tiger Right ?
Wow......thanks guys, loads of great advice........so I've now gotta get this one sorted out. . Any more tips or advice would be great
Cheers
Mark
Cheers
Mark
-
- Warrant Officer 2nd Class
- Posts: 1144
- Joined: Tue Jan 29, 2013 1:59 pm
- Location: The bowels of Kent
Re: Help please....I'm i doing this King tiger Right ?
You can still get away with light surface rust. Even very high quality steel will produce a wipe away layer of surface rust if exposed to the elements where the primer has come off. Given those fenders have to be taken off for rail transport they'd get a fair few scratches and dents, not to mention high explosives going off around them will warp them.
Re: Help please....I'm i doing this King tiger Right ?
Hi Jeman check this site out they also havd the motor you require i have purchased stuff before from them and quite prompt i found .
http://www.sussex-model-centre.co.uk/sh ... sp?id=1218
http://www.sussex-model-centre.co.uk/sh ... sp?id=1218
Re: Help please....I'm i doing this King tiger Right ?
Thanks for that......I'll be getting those motors for it soon for sure.