Aisatam T-34
Aisatam T-34
On the T-34 Asiatam lower chassis I found that the suspension arms have more play then I prefer. to fix this I remove the play by removing the washer that is between the suspension arm and the body where the suspension arm is attached to the body by the allen head screw using a 2 or 2.5 mm allen wrench.it seems that the stock washer does not fit above the threaded part of the screw causing the suspension arm to sit further away from the body.remove stock washer and replace it with the correct size flat washer.which is 4X8 MM (4 mm inside diameter by 8 mm outside diameter). I had also installed the same size washers on the pin that is inserted into the spring/shock,thus preventing the wheel from being pulled in towards the body.