Hi guys,
Need some electrics advice please.
If possible does anybody know how to wire up a heng long shooting unit?
It already has the 2pin black and red wire attached, it's the wires that go from the switch and motor that I am unsure where they go.
Any diagrams or pictures would be most helpful.
Wiring up a new shooting unit
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Wiring up a new shooting unit
Razor 1, Intercept Bogies Angels 2 5, Cleared Hot Engage, Fox 2 Fox 2
Semper In Faecibus Sumus Sole Profundum Variat
HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
Semper In Faecibus Sumus Sole Profundum Variat
HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
Re: Wiring up a new shooting unit
Bump
Anyone??
Anyone??
Razor 1, Intercept Bogies Angels 2 5, Cleared Hot Engage, Fox 2 Fox 2
Semper In Faecibus Sumus Sole Profundum Variat
HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
Semper In Faecibus Sumus Sole Profundum Variat
HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7399
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Wiring up a new shooting unit
Merlin,
This is in German but it should be easy to figure out from the excellent schematic for the HL air soft system.
http://www.rcuniverse.com/forum/attachm ... 1375420875
regards,
Painless
This is in German but it should be easy to figure out from the excellent schematic for the HL air soft system.
http://www.rcuniverse.com/forum/attachm ... 1375420875
regards,
Painless
...Here for the Dawn...
Re: Wiring up a new shooting unit
Is this for your Shermdog Merlin?
ALPHA
ALPHA
Re: Wiring up a new shooting unit
do a google search for RX18 wiring there are loads of pics on there.
Re: Wiring up a new shooting unit
Hi Alpha yes it's for my Shermidog, want it to work so I get the noise and flash from my flash unit.
Razor 1, Intercept Bogies Angels 2 5, Cleared Hot Engage, Fox 2 Fox 2
Semper In Faecibus Sumus Sole Profundum Variat
HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
Semper In Faecibus Sumus Sole Profundum Variat
HL/Tamiya Sherman - Bulldog Turreted
Taigen Tiki Tiger 1
Torro KingTiger
E-25 Tank Destroyer
Re: Wiring up a new shooting unit
OK...will try and take mine apart and get some pics no guarantees that they will be the same though... HL does seem to be transitioning to a new system ...think your chassis is a different gen.Merlin707 wrote:Hi Alpha yes it's for my Shermidog, want it to work so I get the noise and flash from my flash unit.
ALPHA
Re: Wiring up a new shooting unit
WAIT! What Ir unit you using? My photos won't help...I still have a bb unit in mine
ALPHA
ALPHA
Re: Wiring up a new shooting unit
OK Merlin not sure this will help much...this is my Panther ...it has recoil
Lets start with the RX
the "RED" will signify all the connections to the secondary board
The main line is unmarked ...it connects to the 11 pin board....where it separates and goes into the turret is orange
The yellow is the on /off firing switch...the wires with the "X" are for the fire safety light..ignore those...the wires coming from the 11 pin board connect to the motor and elevation unit with one jumper ..usually a black wire going to the third board marked in blue ...the baby blue mark is were the trigger point switch is
just another shot.. but you can see the wires a little better
Here you can see the point switch "BABY BLUE" one wire goes to the on/ off firing the other to the motor
Another shot different angle the third board handles the flash bulb and fire saftey light...then connects to the secondary board which goes back to your RX
That's it...pretty sure it isn't going to help much as I think yours has a different system
GOOD LUCK Merlin
ALPHA
Lets start with the RX
the "RED" will signify all the connections to the secondary board
The main line is unmarked ...it connects to the 11 pin board....where it separates and goes into the turret is orange
The yellow is the on /off firing switch...the wires with the "X" are for the fire safety light..ignore those...the wires coming from the 11 pin board connect to the motor and elevation unit with one jumper ..usually a black wire going to the third board marked in blue ...the baby blue mark is were the trigger point switch is
just another shot.. but you can see the wires a little better
Here you can see the point switch "BABY BLUE" one wire goes to the on/ off firing the other to the motor
Another shot different angle the third board handles the flash bulb and fire saftey light...then connects to the secondary board which goes back to your RX
That's it...pretty sure it isn't going to help much as I think yours has a different system
GOOD LUCK Merlin
ALPHA