Hooben T55 - piccies

[forgebear]

hi guys update the parts list for the t55 as is

?6602-T55 ?
?6602-T55 Part List
?? ?? ?? ?? ??
Description Specification Material Quantity Remarks
??Injection parts
???upper hull ABS 1
???lower hull ABS 1
???turret ABS 1
?turret base ABS 1
??A part A sheet ABS 1
??B part B sheet ABS 1
??C part C sheet ABS 1
??D part D sheet ABS 1
??E part E sheet ABS 1
??F part F sheet ABS 1
??G part G sheet ABS 1
??a fuel drum a ABS 2
??b fuel drum b ABS 2
???road wheel ABS 20
??outside wheel ??rubber 20
???gun cover PVC 1
??b gun barrel b nylon 1
??gun mount nylon 1
??track nylon 2 Assembled
??Die-casting
???torsion block L ???zinc alloy 5
???torsion block R ???zinc alloy 5
?????suspension arm A ???zinc alloy 6
?????suspension arm B ???zinc alloy 4
???suspension arm C ???zinc alloy 2
???Idler wheel ???zinc alloy 4
???A drive sprocket A ???zinc alloy 2
???B drive sprocket B ???zinc alloy 2
????limiter L ???zinc alloy 5
????limiter R ???zinc alloy 5
?long damper ???zinc alloy 4
?short damper ???zinc alloy 4
?long arm for spotlight ???zinc alloy 1
?short arm for spotlight ???zinc alloy 1
???Stamping Parts
???shelf of elevation system ???galvanization iron 1
???NC lathe Parts
??a gun barrel a ?aluminum 1
?idler wheel axle ???nickel plated on steel 2
?road wheel axle ???nickel plated on steel 10
?drive sprocket axle ??brass 2
???wheel axle ??brass 12
??Spring
???spring of road wheel L ??0.8mm steel wire 5
???spring of road wheel R ??0.9mm steel wire 5
?????E-ring suspension arm ??0.10mm steel wire 10
???spring for barrel elevation 3x15mm ??0.11mm steel wire 1
???Gearbox
?main gearbox 1 ??assembled with motor
????turret rotation gearbox 1 ??assembled with motor
????barrel recoil gearbox 1 ??assembled with motor
????barrel elevation gearbox 1 ??assembled with motor
??speaker 82x42x32 1
??steel ball M4 3
??tightwire 2x(240+225mm) 1
?????????screw?nut?washer?E-ring
M2x6mm 9 ????screw
M2.5x6mm 6 ????screw
M3x8mm 42 ????screw
M4x6mm 7 ????screw
M5x14 2 ????screw
M2.5x8mm 3 ??screw
M4x8mm 1 ??screw
M3x4mm 28 ???screw
M2 6 ??E ring
M4 10 ??E ring
M2 1 ??nut
M2.5 3 ??nut
M3 40 ??nut
M5 2 ??nut
M2 2 ?spring washer
M3 40 ?spring washer
M5 2 ?spring washer
M2 2 ???washer
M2.5 3 ???washer
M3 42 ???washer
ST2.9x25mm 2 ??????tapping screw
ST2x6.5mm 11 ??????tapping screw
ST2.2x6.5mm 10 ??????tapping screw
ST2.2x13mm 3 ??????tapping screw
??drive bearing 8x12x10mm 2 ?needle bearing
???tool pack 1
???Instruction 1
??carton 1
dave

[chris3]

moin

can i buy it now some were??

cu christian

[forgebear]

hi chris its not yet made as such i will be stocking it in april when they send them to me they are just finishing the kit off now thanks dave

[chris3]

ah you going to deal with it?
haw many you have odered?

the dealer in germanys say hobben want to many kits to order so ouer dealers are afrais do order a 20 feet container.

cu christian

[forgebear]

hi i have 8 on order to see how they go as it is only the kit that i have listed no dmd or electrics with it thanks dave

[chris3]

ah ok,
have you just an idea about price of your kit?
were exacktly have you odered?

cu christian

[forgebear]

hi from hoobeen and it will be £195 GBP + POST thanks dave

[Matdragon]

i dave seems a good price that with or without electronics / gearboxes / motor parts (turret elevation ect)

cheers mate,

Matt

[forgebear]

hi matt all the parts you will get with the tank are listed above on the tank list no electrics its the best price i can do at the moment there is very little room in them for money but i will make a small bit for my trouble thanks dave

[Ad Lav]

So £200 for a static tank, but comes with gearboxes etc... do we know for sure if its Tamiya compatable?

Tempted